Install A Vehicle Emergency Light In Florida

Installing emergency lighting in your car can be easy and straightforward.

Installing emergency lighting on your car can be an important procedure if you’re a member of the local police force, volunteer fire department or emergency medical services. Installing emergency lights on your car in Florida is the same procedure that would be employed in any other locale. The color of the emergency lights that you may need will depend on the light’s intended use and the local transportation regulations that dictate which color lights can and cannot be used. Suction-based emergency lights are just one of many types of emergency lights that you can install.

Instructions

1. Attach the suction cup at the top of your emergency lights to your windshield, positioning the emergency lights at either the top of the windshield, or the bottom, depending on the design of the suction-based emergency lights that you are installing. These types of emergency lights are designed to match the slope of the windshield glass and offer a relatively seamless installation and look.

2. Run the power cable coming from the assembly of the emergency lights along the A-pillar on your car to avoid obstructing your view of the road through the windshield. The A-pillar is the section between your windshield and the front windows on your car. If the lights are installed at the top of your windshield, the wires will run down the A-pillar to the power adapter. You can secure the wires by tucking them in between the A-pillar and windshield glass.

READ  Location Of The Emergency Release Button On A Buick Lucerne

3. Connect the power cable to the cigarette lighter in your car. This socket will provide power to the emergency lights, which have their own dedicated “On” and “Off” switch to activate when necessary. Many lights include an “On” and “Off” switch directly on the light assembly that allow you to toggle the lights. Other models of lights may feature an “On” and “Off” switch that is wired to the assembly and needs to be mounted to the dashboard. The latter design allows you to place the switch in more accessible locations for quick access.